Developing a Sustainable Tennis Ball: A Comprehensive Analysis of Biodegradable Materials and LCA
DOI:
https://doi.org/10.47611/jsrhs.v14i1.8862Keywords:
Sustainability, Tennis Balls, Hevea Rubber, Russian Dandelion Rubber, Guayule Rubber, Polylactic Acid, Polyhydroxyalkanoates, Hemp Fibers, Flax Fibers, Glass/Banana Fiber Reinforced CompositesAbstract
The tennis ball industry significantly contributes to environmental waste due to the use of non-biodegradable materials. This escalating issue presents the need for sustainable alternatives in tennis ball manufacturing. This literature review investigates environmentally friendly materials that could replace current tennis ball components. By examining natural rubber alternatives derived from plants such as Hevea brasiliensis, Russian dandelion, and guayule, and evaluating biodegradable polymers like polylactic acid (PLA) and polyhydroxyalkanoates (PHAs), the study assesses their viability as core materials. Additionally, organic textiles like hemp and flax fibers are considered for the felt covering due to their high tensile strength and reduced carbon footprints. In the end, the proposed theoretical sustainable tennis ball had a carbon footprint of 0.027 kg CO₂, compared to the emission of a normal ball, which is 0.58 kg CO₂, significantly lowering the environmental impact. Yet, comprehensive life-cycle assessments are necessary to understand the environmental implications fully. Future research should focus on optimizing these materials to balance performance with minimal ecological impact. Adopting sustainable materials in tennis ball manufacturing presents an interesting challenge. While natural materials can substantially reduce carbon footprints, they introduce complexities regarding resource consumption. Collaborative efforts among researchers and industry stakeholders are needed to drive the shift towards more environmentally friendly practices in the industry.
Downloads
References or Bibliography
Ahmed, A. T. M. F., Islam, M. Z., Mahmud, M. S., Sarker, M. E., & Islam, M. R. (2022). Hemp as a potential raw material toward a sustainable world: A review. Heliyon, 8(2), e08753. https://doi.org/10.1016/j.heliyon.2022.e08753
Al Rashid, A., Khalid, M. Y., Imran, R., Ali, U., & Koc, M. (2020). Utilization of banana fiber-reinforced hybrid composites in the sports industry. Materials, 13(14), 3167. https://doi.org/10.3390/ma13143167
Antonanzas, J., & Quinn, J. C. (2024). Carbon footprint assessment of natural rubber derived from Liberian Hevea trees. International Journal of Environmental Science and Technology.
Atiwesh, G., Mikhael, A., Parrish, C. C., Banoub, J., & Le, T.-A. T. (2021). Environmental impact of bioplastic use: A review. Heliyon, 7(8), e07918. https://doi.org/10.1016/j.heliyon.2021.e07918
Chow, K. S., Wan, K. L., Isa, M. N., Bahari, A., Tan, S. H., Harikrishna, K., & Yeang, H. Y. (2007). Insights into rubber biosynthesis from transcriptome analysis of Hevea brasiliensis latex. Journal of Experimental Botany, 58(10), 2429–2440. https://doi.org/10.1093/jxb/erm093
Cornish, K. (2016). Natural rubber crops: Care, harvesting, processing, and issues. In M. S. Pandalai (Ed.), Advances in Biopolymers: Processing and Applications (pp. 247–261). Elsevier.
Elfaleh, I., Touil, S., Ben Aissa, I., Barka, N., & Abbassi, F. (2023). Natural fibers: Structure, extraction, and applications. Results in Engineering, 19, 101271. https://doi.org/10.1016/j.rineng.2023.101271
Fernandez-Bunster, G., & Pavez, P. (2022). Novel production methods of polyhydroxyalkanoates and their innovative uses in biomedicine and industry. Molecules, 27(23), 8351. https://doi.org/10.3390/molecules27238351
Hodgson-Kratky, K. J. M., Stoffyn, O. M., & Wolyn, D. J. (2017). Recurrent selection for rubber yield in Russian dandelion. Journal of the American Society for Horticultural Science, 142(6), 470–475. https://doi.org/10.21273/JASHS04252-17
Junkong, P., Cornish, K., & Ikeda, Y. (2017). Characteristics of mechanical properties of sulfur cross-linked guayule and dandelion natural rubbers. RSC Advances, 7, 50739–50751. https://doi.org/10.1039/C7RA08554K
Kabakcı, G. C., Aslan, O., & Bayraktar, E. (2021). Toughening mechanism analysis of recycled rubber-based composites reinforced with glass bubbles, glass fibers, and alumina fibers. Polymers, 13(23), 4215. https://doi.org/10.3390/polym13234215
Kabakçı, G. C., Aslan, O., & Bayraktar, E. (2022). A review on analysis of reinforced recycled rubber composites. Journal of Composites Science, 6(8), 225. https://doi.org/10.3390/jcs6080225
Kohjiya, S., Ikeda, Y., & Cornish, K. (2016). Strain-induced crystallization behaviour of natural rubbers from guayule and rubber dandelion revealed by simultaneous time-resolved WAXD/tensile measurements: Indispensable function for sustainable resources. RSC Advances, 6(97), 95601–95611. https://doi.org/10.1039/C6RA22455E
Lane, B. D. (2019). Characterisation of tennis ball impacts and investigation into the application of thermoplastic elastomers for tennis ball cores [Doctoral dissertation, Loughborough University].
Lee, D., Supramaniam, J., Soltani, N., Yunus, N. A. M., Saraeian, A., Ariffin, H., Apriyana, W., Shahbudin, S., Suttiruengwong, S., Chandrasekaran, T., & Thumthan, W. (2021). Nanocellulose reinforced rubber composites: A review. Polymers, 13(4), 550. https://doi.org/10.3390/polym13040550
Lundin, O. (2018). Environmental impacts of flax fiber cultivation for composite material reinforcement [Master's thesis, Chalmers University of Technology].
Manaia, J. P., Manaia, A. T., & Rodrigues, L. (2019). Industrial hemp fibers: An overview. Fibers, 7(12), 106. https://doi.org/10.3390/fib7120106
Mosomi, E. K., Olanrewaju, O. A., & Adeosun, S. O. (2024). Pivotal role of polylactide in carbon emission reduction: A comprehensive review. Engineering Reports. Advance online publication. https://doi.org/10.1002/eng2.12909
Naser, A. Z., Deiab, I., & Darras, B. M. (2021a). Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs): Green alternatives to petroleum-based plastics—A review. RSC Advances, 11(28), 17151–17196. https://doi.org/10.1039/D1RA02390J
Naser, A. Z., Deiab, I., Defersha, F., & Yang, S. (2021b). Expanding poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs) applications: A review on modifications and effects. Polymers, 13(23), 4271. https://doi.org/10.3390/polym13234271
Pinizzotto, S., Kadir, A. A. S. A., Gitz, V., Beuve, J. S., Nair, L., Gohet, E., Penot, E., & Meybeck, A. (2021). Natural rubber and climate change: A policy paper. CIFOR.
Rahman, M. Z. (2021). Mechanical and damping performances of flax fibre composites: A review. Composites Part C: Open Access, 4, 100081. https://doi.org/10.1016/j.jcomc.2021.100081
Ranakoti, L., Gangil, B., Mishra, S. K., Singh, T., Sharma, S., Ilyas, R., & El-Khatib, S. (2022). Critical review on polylactic acid: Properties, structure, processing, biocomposites, and nanocomposites. Materials, 15(12), 4312. https://doi.org/10.3390/ma15124312
Ribeiro, J., Bueno, G., Martín, M. R., & Rocha, J. (2023). Experimental study on mechanical properties of hemp fibers influenced by various parameters. Sustainability, 15(12), 9610. https://doi.org/10.3390/su15129610
Rivas-Aybar, D., John, M., & Biswas, W. (2023). Environmental life cycle assessment of a novel hemp-based building material. Materials, 16(22), 7208. https://doi.org/10.3390/ma16227208
Seile, A., Spurina, E., & Sinka, M. (2022). Reducing global warming potential impact of bio-based composites based on LCA. Fibers, 10(9), 79. https://doi.org/10.3390/fib10090079
Singh, J. I., Gulati, P., Kumar, R., & Singh, M. (2019). Flax fiber reinforced polymer composites: A review. SSRN Electronic Journal. https://doi.org/10.2139/ssrn.350846218
Stavropoulos, P., Mavroeidis, A., Papadopoulos, G., Roussis, I., Bilalis, D., & Kakabouki, I. (2023). On the path towards a "greener" EU: A mini review on flax (Linum usitatissimum L.) as a case study. Plants, 12(5), 1102. https://doi.org/10.3390/plants12051102
Student, & Dembele, L. (2019). Russian dandelion (Taraxacum kok-saghyz Rodin) as an alternative to Hevea brasiliensis for natural rubber production [Unpublished manuscript].
Usubharatana, P., & Phungrassami, H. (2018). Carbon footprints of rubber products supply chains (fresh latex to rubber glove). Applied Ecology and Environmental Research, 16(2), 1639–1657. https://doi.org/10.15666/aeer/1602_16391657
Venkatachalam, P., Geetha, N., Sangeetha, P., & Thulaseedharan, A. (2013). Natural rubber producing plants: An overview. African Journal of Biotechnology, 12(6), 544–556. https://doi.org/10.5897/AJB12.2812
Wróblewska-Krepsztul, J., & Rydarowski, H. (2020). Life cycle assessment and carbon footprint analysis of biocomposites based on polypropylene and natural fillers. Materials, 13(15), 3390. https://doi.org/10.3390/ma13153390
Published
How to Cite
Issue
Section
Copyright (c) 2025 Calvin Gonzalez
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright holder(s) granted JSR a perpetual, non-exclusive license to distriute & display this article.
